ASME B18.2.3.3M-1979(R2001) Metric Heavy Hex Screws-Errata - April 1981
|
ID： |
05D1A2BB40E54AFA8D3E0D9781003DB9 |
|
文件大小(MB)： |
0.86 |
|
页数： |
22 |
|
文件格式： |
|
|
日期： |
2010-8-22 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
ANSI 818.2.3.3M-79,26 MARCH 1979,ACCEPTANCE NOTICE,This non-Government document was adopted on 26 March 1979 and is approved for use by the DoD,and Federal Agencies. Metric heavy hex head screws shall conform to this document and Appendix III,which establishes standard ifems for Government application. Appendix III, Table 8 shall be used for item,selection in accordance with the part numbering system and size information contained therein. The,indicated industry group has furnished the clearances required by existing regulations. Copies of the document,are stocked by DoD Single Stock Point, Naval Publications and Forms Center, Philadelphia, PA,19120, for issue to DoD activities and Federal Agencies only. Contractors and industry groups must obtain,copies directly from:,Title of Docum ,ent:,"L,The American Society of Mechanical Engineers,United Engineering Center, 345 E. 47th Street,NewYork,NY 10017 or,The American National Standards Institute,1430 Broadway, New York, NY 10018,Screw, Heavy Hex Head - Mc :tric,ANSI Document No.: ANSI B18.2.3.3M-1979,Date of Specific Issue Adopted: 26 March 1979,Releasing Industry Group: The American Society of Mechanical Engineers,Custodians:,Army - AR,Navy - AS,Air Force - 99,Review Activities:,Army - AV, MI, ER,Naky - MC,NSA - NS,DLA - IS,Civil Agencies:,GSA-FSS,Military Coordinating Activity,Army - AR,(Project 5305-1397),User Activities:,Army - ME, AT,Navy - SH,NOTICE: When reaffirmatiQn, amendment, revision, or cancellation of this standard is initially proposed,the: industry group responsible for this standard shall inform the Military Coordinating Activity of the,proposed action and request their participation. 1 FSC 5305 I,No part of this document may be reproduced in any form, in an electronic,retrieval system or otherwise, without the prior written permission of the,publisher.,Date of Issuance: August 31,1979,Copyright01979 by,THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS,All Rights Reserved,Printed in U.S.A.,_ - ~ = = ~ ~ =.~~ ~ ___== -~ ~ _-.~~~ -~ ~~ -.,THIS DOCUMENT CONTAINS I " PAGES.,~___ ~ ~ ~ ~~~~ ~ ~ ~~,~ ~= ~~,ERRATA,to,ANSI B18.2.3.3M-1979,METRIC HEAVY HEX SCREWS,Page 3, Note 17, change B1.13 to read B1.13M,Page 6, Table 2, for Nominal Length 180, under,M20 x 2.5 change 123.0 to read 128.0,Page 7, Table 3, in first column under B (Ref),change to read Screw Length 125,Page 7, Table 3, in second column under B (Ref),change to read Screw Lengths > 125 and < 200,Page 7, Table 3, in X (Ref) column, change to read,Transition Thread Length,Page 7, Table 4, in first column heading, delete D,Page 9, in lowest illustration, change CLASS 6h to,read CLASS 6H,Page 12, for MATERIAL AND FINISH CODE A,and B, change 0.005 mm to read 5.1 pm,THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS,345 East 47th Street, New York, N.Y. 10017,April 1981,ASME BL8.2-3.3M 77 075 767”0 00f43061 O W,A M E R I C A N N A T I O N A L S T A N D A R D,Metric Heavy Hex Screws,. ANSI B18.2.3.3M - 1979 Government Key Words:,Screw, Heavy Hex Head -,Metric,SECRETARIAT,SOCIETY OF AUTOMOTIVE ENGINEERS,THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS,PUBLISHED BY,T H E A M E R I C A N S O C I E T Y OF M E C H A N I C A L E N G I N E E R S,United Engineering Center 345 East 47th Street New York, N. Y. 1 O01 7,ANSI B18.2.3.3M-79,26 MARCH 1979,ACCEPTANCE NOTICE,This non-Government document was adopted on 26 March 1979 and is approved for use by the DoD,and Federal Agencies. Metric heavy hex head screws shall conform to this document and Appendix III,which establishes standard items for Government application, Appendix III, Table 8 shall be used for item,selection in accordance with the part numbering system and size information contained therein. The,indicated industry group has furnished the clearances required by existing regulations. Copies of the document,are stocked by DoD Single Stock Point, Naval Publications and Forms Center, Philadelphia, PA,19120, for issue to DoD activities and Federal Agencies only. Contractors and industry groups must obtain,copies directly from:,The American Society oMf echanical Engineers,United Engineering Center, 345 E. 47th Street,New York, NY 10017 or,The American National Standards Institute,1430 Broadway, New York, NY 10018,Title of Document: Screw, Heavy Hex Head - Metric,ANSI Document No.: ANSI B18.2.3.3M-1979,Date of Specific Issue Adopted: 26 March 1979,Releasing Industry Group: The American Society of Mechanical Engineers,Custodians:,Army - AR,Navy - AS,Air Force - 99,Review Activities:,Army - AV, MI, ER,Navy - MC,DLA - IS,NSA - NS,Civil Agencies:,GSA-FSS,Military Coordinating Activity,Army - AR,(Project 5305-1397),User Activities:,Army - ……
……